PMI interval calculator
Enter the date of the last safety inspection (PMI) and the interval on your operator licence, in weeks. You get every PMI due in the 12 months after it, each shown as the ISO week it falls in.
The calculator needs JavaScript. Without it, here is how the dates are counted, with a worked example.
How it counts
Each PMI is due the number of weeks on your licence after the one before. The Guide to maintaining roadworthiness (section 4.2) recommends planning by ISO week, where every week runs from Monday to Sunday: an inspection “should be completed within the relevant ISO week it falls”. So a PMI is on time on any day of the week it falls in.
Each date assumes the PMI before it was done in its own week.
Worked example
Every 6 weeks from Wed 4 Mar 2026: 8 PMIs due up to Thu 4 Mar 2027.
| PMI | ISO week | On time from | Last day on time |
|---|---|---|---|
| 1 | Week 16, 2026 | Mon 13 Apr | Sun 19 Apr 2026 |
| 2 | Week 22, 2026 | Mon 25 May | Sun 31 May 2026 |
| 3 | Week 28, 2026 | Mon 6 Jul | Sun 12 Jul 2026 |
| 4 | Week 34, 2026 | Mon 17 Aug | Sun 23 Aug 2026 |
| 5 | Week 40, 2026 | Mon 28 Sep | Sun 4 Oct 2026 |
| 6 | Week 46, 2026 | Mon 9 Nov | Sun 15 Nov 2026 |
| 7 | Week 52, 2026 | Mon 21 Dec | Sun 27 Dec 2026 |
| 8 | Week 5, 2027 | Mon 1 Feb | Sun 7 Feb 2027 |
These are the weeks of the Guide's own example (16, 22, 28 and so on). 2026 has 53 ISO weeks, so the PMI after week 52 falls in week 5 of 2027.
If a PMI is done early
An early PMI does not stretch the next gap. The Guide (section 4.2) gives two options, using a 6-week plan with a PMI due in week 22 that was done early, in week 20:
- inspect again in week 22, and keep to the original plan (weeks 28, 34 and so on); or
- start the count again from the early PMI (weeks 26, 32 and so on).
This calculator always counts the second way, from the last PMI actually done. Enter the early date as the last PMI and it counts from there. If you keep to your original plan instead, enter the date of the PMI that was done in its planned week.
What it does not do
- It does not tell you which interval to choose or to declare. The Guide (section 4.2) explains how to choose one.
- Intervals over 13 weeks: the Guide says an inspection frequency “would normally range between 4 to 13 weeks”, and this calculator uses at most 13. If you enter more, it says so above the dates and leaves your entry as it is.
- Mileage-based programmes are not covered here. The Guide says a mileage-based programme will “need to be linked to time”.
- Vehicles off the road, first-use inspections, brake tests and MOTs.
Rule source: DVSA, Guide to maintaining roadworthiness, section 4.2. Last checked 15 Nov 2026. This calculator is general guidance, not legal advice.
Contains public sector information licensed under the Open Government Licence v3.0.
Hear when Fleetmark opens
Fleetmark is O-licence compliance software for UK lorry operators and their transport managers. It is not yet open to operators.